R3VLimited Forums

Go Back   R3VLimited Forums > E30 Technical Forums > Appearance & Cosmetic > General Cosmetics

Reply
 
Thread Tools Search this Thread
Old 06-27-2012, 09:39 AM   #1
xAZxE30x
E30 Fanatic
 
Join Date: Sep 2008
Location: AZ
Posts: 1,235
Official Mtech 2 Part Numbers

I had a rough time piecing together part numbers and there seemed to be some confusion on the matter regarding which is which for each model


COUPE:

here is the correct part numbers for all needed for a coupe (minus trunk spoiler and hardware, can do hardware later if there is demand for it)

Front Bumper Cover


Front Spoiler (cant find picture atm)
51112239709

Rear Bumper


Left Sideskirt


Right Sideskirt


Door pods







The front spoiler and rear bumper are sold as "kits" so they include all the necessary hardware to install properly. Everything else (pods,skirts, F bumper) need hardware which must be purchased alone. I have all the part numbers for the hardware listed here.. wont take pics right now because that will take forever. but its all there



SEDAN:

I do not have pictures of some of the sedan pieces so I will just post the part numbers. The sideskirts are NLA and my dealer said they are not available anymore



hopefully i didn't make any mistakes.. kept getting the pics mixed up for some reason

thanks!

//Austin
__________________
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
xAZxE30x is offline   Reply With Quote
Old 06-27-2012, 09:47 AM   #2
xAZxE30x
E30 Fanatic
 
Join Date: Sep 2008
Location: AZ
Posts: 1,235
SORRY for any problems with the group buy that I had tried putting together. Feel free to PM me if you would like help with figuring out your kits but I can no longer supply them at the moment due to some outside issues

here is the correct list of coupe and sedan part numbers that are needed to piece a complete kit (minus trunk spoiler)

I have read that people are having trouble getting side skirts and door pods? a few months ago my dealer told me that they had plenty of everything, except sedan side skirts. those are officially NLA afaik. Also, a lot of places say that they have them in stock and when you go to place your order they wont process the order because they wont order anymore. Dealer is going to be your best bet and just make sure that your parts guy is patient and doesn't jump the gun saying they don't have any!
__________________
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
xAZxE30x is offline   Reply With Quote
Old 06-29-2012, 05:54 AM   #3
MR 325
Moderator
 
MR 325's Avatar
 
Join Date: Oct 2003
Location: Santa Clarita, CA
Posts: 37,526
Excellent work on this, thank you!
__________________
BimmerHeads
Classic BMW Specialists
Santa Clarita, CA

www.BimmerHeads.com

MR 325 is offline   Reply With Quote
Old 12-16-2013, 07:54 AM   #4
beefjurky69
Mod Crazy
 
Join Date: May 2009
Location: new jersey
Posts: 613
A these kits direct bolt on with all the mounting hardware lower valance and bumper? Can you just use the mtech2 valance and is bumper if you wanted to go that route?
__________________


Build Thread
http://www.e30tech.com/forum/showthread.php?t=84988

"When In Doubt Boost It Out"
~89 325I Turbo 11.90 @ 121~
~ 420whp/420tq~
15psi

~Paul Burke Built 2.8L Stroked M20
~666 Divided Mani T3
~6262 T3 Turbo
~O'ringed Block SS
~Custom Fuel System
~3'' Turbo Back
~50mm Tial Bov
~Dual Tial 38 Gates
beefjurky69 is offline   Reply With Quote
Old 12-18-2013, 09:46 AM   #5
xAZxE30x
E30 Fanatic
 
Join Date: Sep 2008
Location: AZ
Posts: 1,235
Quote:
Originally Posted by beefjurky69 View Post
A these kits direct bolt on with all the mounting hardware lower valance and bumper? Can you just use the mtech2 valance and is bumper if you wanted to go that route?
If you order the 51112239709, front spoiler install kit, it will come with everything to install that. There have been quite a few people that have installed this valence underneath the IS bumper. There was a guy in Europe recently that posted pics of this but i cant remember his user name
__________________
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
xAZxE30x is offline   Reply With Quote
Old 12-18-2013, 09:57 AM   #6
reelizmpro
R3V OG
 
reelizmpro's Avatar
 
Join Date: Dec 2003
Location: LA-SoCal
Posts: 8,703
As long as you have the facelift valance the bumper won't matter. The front M tech spoiler is just a cover that goes over the existing facelift valance.

Here's an 88 iS with tucked/painted metal bumpers...

__________________
"I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj

85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
88 M3 - LACHSSILBER/SCHWARZE
89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
91 M TECHNIC TURBO - MACAOBLAU/M TECH CLOTH-LEATHER
reelizmpro is offline   Reply With Quote
Old 08-28-2014, 10:06 AM   #7
PutterMcGavin
Mod Crazy
 
Join Date: Mar 2009
Location: Charleston, SC
Posts: 605
FYI I took what I found above and in a couple links to create an Excel spreadsheet for pricing. I already had the main body part and put this together really for hardware only. It lists the part numbers, quantity needed, part name and has columns that when you enter the part price it will add it all up. Kind of easy when comparing against multiple outlets...

PM with your email address if you'd like a copy! The site won't let me upload it.

Couple notes:

1) This is NOT to be taken as the gospel on Mtech II parts; please double check for your needs.

2) If I made an error please let me know and I'll fix it, don't rip it apart. I'll update it as I can.

3) Pricing is what I found roughly two weeks ago (8/22/2014) so the prices will fluctuate. Simply put in the new values and it should calculate it for you.

4) It seems that you CAN most the the Mtech II bits still! I couldn't find the rear bumper in supply though to put on there.

5) Some items MAY NEED to come from Germany so be prepared to wait!

6) Many places will pricematch but the deals are where you get free shipping! i.e. Fairfax BMW offers free shipping on orders over $250 I think. So an authentic Mtech II front valance for $355 shipped from Germany. Not bad...

If anyone has the drilling templates please let me know! I'll be needing those.

Last edited by PutterMcGavin; 08-29-2014 at 07:15 AM.
PutterMcGavin is offline   Reply With Quote
Old 12-28-2014, 11:36 PM   #8
mr2peak
R3VLimited
 
mr2peak's Avatar
 
Join Date: Aug 2008
Location: Bay Area
Posts: 2,353
FYI I just purchased all new fasteners for my M-Tech 2 kit, lots of stuff breaks on disassembly. I shopped around, and it still cost over $400 so be prepared.

Gonna look nice though.

If anyone needs a list of part numbers and quantities, PM me and I'll send you a spreadsheet. Too much to post, if you need individual stuff look at RealOEM.com
__________________
Drive it hard. Maintain it well.


Convertible Technical & Discussion
A Topless Memorandum
mr2peak is offline   Reply With Quote
Old 01-28-2015, 08:15 AM   #9
xAZxE30x
E30 Fanatic
 
Join Date: Sep 2008
Location: AZ
Posts: 1,235
Quote:
Originally Posted by mr2peak View Post
FYI I just purchased all new fasteners for my M-Tech 2 kit, lots of stuff breaks on disassembly. I shopped around, and it still cost over $400 so be prepared.

Gonna look nice though.

If anyone needs a list of part numbers and quantities, PM me and I'll send you a spreadsheet. Too much to post, if you need individual stuff look at RealOEM.com
Yes, the hardware adds up quickly! Especially if you are not reusing anything. I have a list of all the hardware but seem to have lost it somewhere in my garage
__________________
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
xAZxE30x is offline   Reply With Quote
Old 02-22-2015, 09:04 PM   #10
E30 Memorial
Grease Monkey
 
E30 Memorial's Avatar
 
Join Date: Jan 2005
Location: Seattle, Wa.
Posts: 314
Here's a link with some additional information for assembling the M-Tech 2 parts

http://translate.google.com/translat...3D17%26t%3D449
__________________
Steve
'89 332i
'90 M3
'01 530is
'12 MCS BW
'15 RAM 3500
E30 Memorial is offline   Reply With Quote
Old 05-07-2015, 12:43 PM   #11
Philipangoo
Mod Crazy
 
Philipangoo's Avatar
 
Join Date: Sep 2008
Location: Dallas
Posts: 730
This is a useful spreadsheet. Has anyone found a online supplier that offers free shipping ?
Philipangoo is offline   Reply With Quote
Old 08-30-2015, 10:09 PM   #12
RIGGSMAGOO
Noobie
 
Join Date: Aug 2015
Location: Tahoe
Posts: 3
Quote:
Originally Posted by xAZxE30x View Post
SORRY for any problems with the group buy that I had tried putting together. Feel free to PM me if you would like help with figuring out your kits but I can no longer supply them at the moment due to some outside issues

here is the correct list of coupe and sedan part numbers that are needed to piece a complete kit (minus trunk spoiler)

I have read that people are having trouble getting side skirts and door pods? a few months ago my dealer told me that they had plenty of everything, except sedan side skirts. those are officially NLA afaik. Also, a lot of places say that they have them in stock and when you go to place your order they wont process the order because they wont order anymore. Dealer is going to be your best bet and just make sure that your parts guy is patient and doesn't jump the gun saying they don't have any!
now when you say dealer do you mean bmw dealership parts department?
RIGGSMAGOO is offline   Reply With Quote
Old 09-15-2015, 04:13 AM   #13
Corleone
Noobie
 
Join Date: Sep 2015
Location: Lisbon
Posts: 1
Dear all,

I am looking for a M-tech II kit for my car (E30 / 320is, MY 1989) here in Portin second hand and consequently I am facing the possibility to get one brand new.

I have already seen this kit on BMW OEM parts page. It is not cheap neither is simple for me (rookie in this field) to understand what is the final amount that I will have to deal with. On the other hand I believe that the excel spreadsheet works as a reference and huge help on this issue as all the part numbers and quantities are fully detailed.

Can anyone send me that spreadsheet so I can try to get one final price and....do not eat anymore till 2034 to get the amount of money needed?

Thanks in advance.

Regards,
Corleone is offline   Reply With Quote
Old 09-15-2015, 05:52 AM   #14
flyboyx
R3V OG
 
flyboyx's Avatar
 
Join Date: Sep 2008
Location: Houston, tx
Posts: 8,187
since you are in europe, your best bet would be to find a kit in germany or england and have it shipped to you. the last time i checked, the rear bumper/valance are no longer available.
__________________

Gigitty Gigitty!!!!

88 cabrio becoming alpina b6 3.5s transplanted s62
92 Mtech 2 cabrio alpinweiss 770 code
88 325ix coupe manual lachsilber/cardinal
88 325ix coupe manual diamondschwartz/natur
87 e30 m3 for parts lachsilber/cardinal(serial number 7)
12 135i M sport cabrio grey/black
flyboyx is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 01:26 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2004 - 2020 R3VLimited LLC