R3VLimited Forums

Go Back   R3VLimited Forums > E30 Technical Forums > Engine & Drivetrain > M10

Reply
 
Thread Tools Search this Thread
Old 04-29-2019, 07:19 PM   #1
tractionzero
Noobie
 
Join Date: Apr 2019
Location: Vernon BC
Posts: 2
M10 Timing issues

Due to the lack of not having a repair manual I am relying on alldata for my information.

I have a 1984 bmw 318i, 3 years ago I went around a corner and my battery ran into my distributor killing my car (bent the distributor rod).

I soon after bought a new distributor but the lack on timing information I couldnt get it right.

I would set my crank pulley mark to the dowel and would check the mark on the flywheel to determine TDC. I then would run my spark plugs from the very top 1-3-4-2. if i try to start my car at this point she basically doesnt wanna crank... i advance the timing slightly and she cranks over but isnt fully happy..

I eventually get her running and shes running at idle which made me happy.. got her up to operating temps. I then decided I would pull the vacuum advance but to not let it choke itself out id clamp off the vacuum line.

well... as soon as i disconnected the line she sputtered and died..

I thought no big deal ill just fire her right back up since it was timed enough to idle..

well now when i try to turn it over it puffs white smoke out my intake..
and pops..

I assumed i was close enough because she was idling that there is no way I was that far out.. but now that i start it i feel like i am.. but why would it have idled but now wants to blow white smoke out the intake... im at a loss with this and about to light it on fire haha...


picture of my car for fun:
tractionzero is offline   Reply With Quote
Old 05-02-2019, 08:01 PM   #2
TobyB
R3V Elite
 
TobyB's Avatar
 
Join Date: Oct 2011
Location: Carnation WA usa
Posts: 4,346
buy a timing light.

set it to tdc #1, then try aligning
the rotor with the line on the distributor,
where the cap sits.
If there's no line, set the rotor to align with the cap tower for #1,
then look to see if the reluctor arms underneath are aligned, and make them so.

That'll start, especially if you advance it a bit, then a bit more once it catches.

Then use your timing light to get the bb visible in the window on the bellhousing.



t
__________________
Quote:
now, sometimes I just mess with people. It's more entertaining that way. george graves
TobyB is offline   Reply With Quote
Old 05-20-2019, 03:45 PM   #3
packratbimmer
E30 Modder
 
Join Date: Dec 2009
Location: ME
Posts: 815
Make sure you did not blow any vacuum hoses off when cranking. Did it backfire at all?
packratbimmer is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:20 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2004 - 2020 R3VLimited LLC